确认BOM数据
交货地:
ML-XT Sealed Connection System
The rugged ML-XT connection system with market-leading high-performance seal technology is a cost-competitive solution offering superior reliability for critical vehicle-wiring applications in harsh environments
选择矩阵
（图片仅供参考）
Receptacle
Receptacle Wedgelock (TPA)
Cavity Plug
Plug
Plug Wedgelock (TPA)Cavity Plug
Crimp Terminals
Customers specifying low-circuit-count connectors for rugged harness applications in vehicles require a highly-reliable, securely sealed connection system to minimize electrical failures and prevent costly machinery downtime. This system needs to withstand high temperatures and harsh environments, including exposure to chemicals, at the lowest cost. The ML-XT system meets these needs with high-performing seal technology proven to prevent ingress of fluids under extreme conditions. Advanced two-shot LSR molded one-piece plug, and rear HCR seals with cover guards guarantee optimum seal positioning at all times, including during mating and unmating of the header and receptacle. The result is a cost-competitive solution that achieves superior reliability over de-facto, industry-standard systems.
Covalently interlocked one-piece plug housing and interfacial seal formed by 2-shot LSR (liquid silicone rubber) molding technology
Prevents fluid ingress; system is IP69K-rated and J2030 power-wash test capable
Prevents loss/misalignment of the seal; ensures repeatable retention during unmating and mating of plug and receptacle
Latched rear covers
Locks in rear HCR seals
Allows for flexible cable exits and cable movement whilst maintaining optimum seal position to prevent leak paths
Utilizes Molex proven XRC terminals with current ratings up to 13.0A
Supports tooling widely used at harness makers
Wedgelock / TPA (Terminal Position Assurance) loaded after terminals
Locks terminals in position for secure electrical contact
Heatshrink tubing cover
Optional cover available for both male and female ends
It is shaped for heatshrink tubing use, for added contaminant protection
Rear seals made from HCR (high consistency rubber)
Provides greater tear-resistance over LSR material; prevents damage to rear seal during terminal insertion/ extraction
Plug and receptacle housings are supplied pre-assembled with internal HCR rear seals locked-in by rear covers
Reduces inventory, assembly time and costs for harness manufacturers and prevents loss of rear seals for a cost-competitive mated system
High terminal retention force; exceeds 111N
Withstands high axial pull-out forces per J2030 specification
9 color-coded housings available
Enables easy visual mating of harnesses to prevent mis-mating
Automotive
Commercial Vehicle
Defense
这并非此产品应用的最终名单。它只代表了一些最常见的用途。
ML-XT Sealed Connector Order Number Selection Guide
Ml-XT Sealed Connection System: Better Design; Better Performance
Inertia Lock Wire-to-Wire System
Inertia Lock design provides superior mating assurance compared to standard thumb-lock style designs
MLX Power Connectors
6.35mm pitch, 2.13mm diameter pin and socket power connector system. Also includes MLX Ground Block System to centralize electrical ground wiring.
MX150L Industrial Sealed Connector System
A pre-assembled, submersible system that exceeds IEC IP67 requirements, designed for commercial-vehicle, marine and other harsh environments
产品亮点
